Manufacturers make a lot of tricks

The problem of counterfeit tree species names, that is, the names of the tree species indicated on the product do not match the identification results, and most of them are shoddy, such as using birch wood to pretend to be cherry wood, using Southeast Asian hardwood to counterfeit imported red sandalwood and pumping wood, and naming the gamba bean produced in Indonesia" "Gold is not exchanged" and so on, misleading consumers.

Individual manufacturers illegally “brand” their own floors for sale, affix the trademarks and names of certain famous brands on the floor or packaging signs, or use similar names or patterns to confuse consumers' vision.

1. Promotions misrepresented

In order to promote sales, some small flooring companies often launch some "special offer" and "low-price products" activities. In fact, some defective or fake products. Once there is a problem, when a consumer submits a return, the other party will always reject it on the grounds of non-return or exchange of special offers.

2. Sale of processed products and qualified products

First sell to consumers as qualified products, and then match some defective and defective products when paving, to deceive consumers. Or put a good-quality floor and a poor-quality floor together for sale, and sell it at the price of a good board. Or a mix of high-end products with similar colors and textures and cheap products for sale.

3. Uncommon specification floor

The specifications and sizes of common specifications floors have been widely recognized by consumers, but there are occasionally unusual specifications on the market. These are mostly processed products, such as changing the problematic large board to a small board, or scraps and so on. There is another fatal consequence of buying a floor of unusual specifications: if there is a problem with a small area of the floor, you cannot buy the same specifications on the market, and you have to remove the floor or replace the material in the whole house.

4. The wood material is different, the price difference is big

Individual companies did not perform differentiated processing based on the quality of wood materials (such as differences in heart and sapwood), but mixed them and sold them to consumers.

5. Make a fuss from paving

Many floor sellers will provide laying services, and the cost is particularly low. The reason is that the dealers subcontract the floor laying to irregular decoration teams.

In addition, some sellers seem to be fair and reasonable in the price of the floor, but they are asking the consumers for all kinds of fees.

Consumers have their own misunderstandings

When buying solid wood flooring, many consumers do not understand the characteristics and quality of the wood, but just blindly choose the high-quality solid wood flooring standard according to their own wishes. As a result, they often spend a lot of money and the effect is not good. Awkward situation. For this reason, there are several consumer misunderstandings that must be paid attention to.

Consumption misunderstanding one-choose floor to pursue long and wide

Pursue the wider, longer and more stylish when buying solid wood flooring. Such a choice seemed magnificent at the time, but cracks, warping and other deformations are likely to occur soon.

Consumption Misunderstanding 2: The seller and the laying party are separated

When the seller and the laying party are not the same unit. There was a problem with the floor, and the two sides bucked each other, causing consumers to suffer and regret. Therefore, the seller and the laying company are best to be one.

Consumption Misunderstanding Three-Pursuing plain boards and reluctant to buy lacquered boards

Some consumers think that plain boards are genuine solid wood flooring, and the price is cheap, and they can save part of the processing fee when painting, but there are problems such as pollution and the quality of the paint film cannot be guaranteed.

Consumption Misunderstanding 4: Too picky about color difference and pursue consistent texture

Solid wood flooring is a natural wood product. The color of the wood is different due to different planting locations, different sunlight exposure, and different temperature and humidity. In addition, if the same wood saw a plank, because the sawing position is different, the color is different, and the wood texture is different. The color of the sapwood is light and the color of the heartwood is dark. Therefore, the solid wood floor objectively has the phenomenon of color difference and uneven pattern, which is a natural phenomenon.

Therefore, when choosing solid wood flooring: as long as there is no obvious color difference, it is not necessary to demand the same color.

Consumption Misunderstanding 5-Adding blockboard when laying

Some consumers add blockboard on the keel for excessive pursuit of foot feeling. In fact, the quality of blockboard varies greatly. The quality of blockboard affects the paving quality of solid wood flooring. Therefore, if you want to add fine wood flooring, For wood board, you must buy products from large enterprises of well-known brands. It is best to use multi-layer plywood instead of blockboard.

Consumption Misunderstanding 6-Excessive pursuit of precious materials

There are more than one hundred kinds of solid wood flooring on the market. The price, performance, and material of different tree species are dizzying. It is not that the more expensive the better the performance. Consumers should buy according to their living environment, decoration style, personal preference and economic strength.

Consumption Misunderstanding No. 7-Only focus on buying, not laying

There are many ways to lay solid wood flooring, such as direct pasting method, keel laying method, suspension laying method, etc. No matter which laying method is used, a good construction team must be selected.